|
DIY GUIDE: DIRECTIONAL ANTENNA
|
|
|
|
During a workshop we built directional antennas according to the following instructions:
Items list materials |
|
|
1. 550mm length / 40mm diameter of UPVC pipe |
| 2. 150mm square aluminium plate | |
| 3. N connector to plug into the pigtail from the wireless card | |
| 4. a length of 12 gauge solid copper wire | |
| 5. 1x10mm dia nut & bolt | |
| 6. 4x1mm dia nuts & bolts | |
| 7. Plastic cap from large aerosol can that will fit over the UPVC pipe | |
| 8. copper plate 55 mm x 12.5 mm | |
| 9. electrical wire | |
| tools | |
| 10. scissors | |
| 11. power drill | |
| 12. glue gun | |
| 13. screwdriver | |
| 14. soldering iron | |
| 15. hacksaw | |
| 16. file | |
| 17. pliers | |
| 18. pins | |
| action |
|
1.
|
15.
|
8.
 |
13.
 |
10. |
17.
|
7.
 |
4.
11.
|
